Auto Cad Shortcut Commands Click heare

S.No                                                       Auto Cad Shortcut Commands
1 Q QSAVE / Saves the current drawing.
2 A ARC / Creates an arc.
3 Z ZOOM / Increases or decreases the magnification of the view in the current viewport.
4 W WBLOCK / Writes objects or a block to a new drawing file.
5 S STRETCH / Stretches objects crossed by a selection window or polygon.
6 X EXPLODE / Breaks a compound object into its component objects.
7 E ERASE / Removes objects from a drawing.
8 D DIMSTYLE / Creates and modifies dimension styles.
9 C CIRCLE / Creates a circle.
10 R REDRAW / Refreshes the display in the current viewport.
11 F FILLET / Rounds and fillets the edges of objects.
12 V VIEW / Saves and restores named views, camera views, layout views, and preset views.
13 T MTEXT / Creates a multiline text object.
14 G GROUP / Creates and manages saved sets of objects called groups.
15 B BLOCK / Creates a block definition from selected objects.
16 H HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill.
17 J JOIN / Joins similar objects to form a single, unbroken object.
18 M MOVE / Moves objects a specified distance in a specified direction.
19 I INSERT / Inserts a block or drawing into the current drawing.
20 O OFFSET / Creates concentric circles, parallel lines, and parallel curves.
21 L LINE / Creates straight line segments.
22 P PAN / Adds a parameter with grips to a dynamic block definition.
23 Ctrl+E Cycle isometric planes
24 Ctrl+F Toggle running object snaps
25 Ctrl+G Toggle Grid
26 Ctrl+H Toggle Pick Style
27 Ctrl+Shift+H Toggle display palettes
28 F1 Display Help
29 F2 Toggle text screen
30 F3 Toggle object snap mode
31 F4 Toggle tab mode
32 F5 Toggle Isoplane
33 F7 Toggle grid mode
34 F8 Toggle ortho mode
35 F9 Toggle snap mode
36 F10 Toggle polar mode
37 F11 Toggle object snap tracking
38 F12 Toggle dynamic input mode
39 Ctrl+0 (zero) Clean Screen
40 Ctrl+1 Property Palette
41 Ctrl+2 Design Center Palette
42 Ctrl+3 Tool Palette
43 Ctrl+4 Sheet Set Palette
44 Ctrl+7 Markup Set Manager Palette
45 Ctrl+8 Quick Calc
46 Ctrl+9 Command Line
47 Ctrl+C Copy object
48 Ctrl+X Cut object
49 Ctrl+V Paste object
50 Ctrl+Shift+C Copy to clipboard with base point
51 Ctrl+Shift+V Paste data as block
52 Ctrl+Z Undo last action
53 Ctrl+Y Redo last action
54 Ctrl+[ (or Ctrl+\) Cancel current command
55 Esc Cancel current command
56 A ARC / Creates an arc.
57 AA AREA / Calculates the area and perimeter of objects or defined areas.
58 ADC ADCENTER / Manages and inserts content such as blocks, xrefs, and hatch patterns.
59 AL ALIGN / Aligns objects with other objects in 2D.
60 AR ARRAY / Creates multiple copies of objects in a pattern.
61 ATE ATTEDIT / Changes attribute information in a block.
62 ATI ATTIPEDIT / Changes the textual content of an attribute within a block.
63 ATT ATTDEF / Redefines a block and updates associated attributes.
64 B BLOCK / Creates a block definition from selected objects.
65 BC BCLOSE / Closes the Block Editor.
66 BE BEDIT / Opens the block definition in the Block Editor.
67 BH HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill.
68 BO BOUNDARY / Creates a region or a polyline from an enclosed area.
69 BR BREAK / Breaks the selected object between two points.
70 BS BSAVE / Saves the current block definition.
71 BVS BVSTATE / Creates, sets, or deletes a visibility state in a dynamic block.
72 C CIRCLE / Creates a circle.
73 CBAR CONSTRAINTBAR / A toolbar-like UI element that displays the available geometric constraints on an object.
74 CH PROPERTIES / Controls properties of existing objects.
75 CHA CHAMFER / Bevels the edges of objects.
76 CLI COMMANDLINE / Displays the Command Line window.
77 CO COPY / Copies objects a specified distance in a specified direction.
78 COL COLOR / Sets the color for new objects.
79 CT CTABLESTYLE / Sets the name of the current table style.
80 D DIMSTYLE / Creates and modifies dimension styles.
81 DAN DIMANGULAR / Creates an angular dimension.
82 DAR DIMARC / Creates an arc length dimension.
83 DBA DIMBASELINE / Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension.
84 DCE DIMCENTER / Creates the center mark or the centerlines of circles and arcs.
85 DCO DIMCONTINUE / Creates a dimension that starts from an extension line of a previously created dimension.
86 DDA DIMDISASSOCIATE / Removes associativity from selected dimensions.
87 DDI DIMDIAMETER / Creates a diameter dimension for a circle or an arc.
88 DED DIMEDIT / Edits dimension text and extension lines.
89 DI DIST / Measures the distance and angle between two points.
90 DIV DIVIDE / Creates evenly spaced point objects or blocks along the length or perimeter of an object.
91 DJL DIMJOGLINE / Adds or removes a jog line on a linear or aligned dimension.
92 DJO DIMJOGGED / Creates jogged dimensions for circles and arcs.
93 DL DATALINK / The Data Link dialog box is displayed.
94 DLU DATALINKUPDATE / Updates data to or from an established external data link.
95 DO DONUT / Creates a filled circle or a wide ring.
96 DOR DIMORDINATE / Creates ordinate dimensions.
97 DOV DIMOVERRIDE / Controls overrides of system variables used in selected dimensions.
98 DR DRAWORDER / Changes the draw order of images and other objects.
99 DRA DIMRADIUS / Creates a radius dimension for a circle or an arc.
100 DRE DIMREASSOCIATE / Associates or re-associates selected dimensions to objects or points on objects.
101 DRM DRAWINGRECOVERY / Displays a list of drawing files that can be recovered after a program or system failure.
102 DS DSETTINGS / Sets grid and snap, polar and object snap tracking, object snap modes, Dynamic Input, and Quick Properties.
103 DT TEXT / Creates a single-line text object.
104 DX SAVEAS / Saves the current drawing.
105 E ERASE / Removes objects from a drawing.
106 EL ELLIPSE / Creates an ellipse or an elliptical arc.
107 EPDF EXPORTPDF / Exports drawing to PDF.
108 ER EXTERNALREFERENCES / Opens the External References palette.
109 EX EXTEND / Extends objects to meet the edges of other objects.
110 EXIT QUIT / Exits the program.
111 EXP EXPORT / Saves the objects in a drawing to a different file format.
112 F FILLET / Rounds and fillets the edges of objects.
113 G GROUP / Creates and manages saved sets of objects called groups.
114 GD GRADIENT / Fills an enclosed area or selected objects with a gradient fill.
115 GEO GEOGRAPHICLOCATION / Specifies the geographic location information for a drawing file.
116 H HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill.
117 HE HATCHEDIT / Modifies an existing hatch or fill.
118 HI HIDE / Regenerates a 3D wireframe model with hidden lines suppressed.
119 I INSERT / Inserts a block or drawing into the current drawing.
120 ID ID / Displays the UCS coordinate values of a specified location.
121 IM IMAGE / Displays the External References palette.
122 IMP IMPORT / Imports files of different formats into the current drawing.
123 IN INTERSECT / Creates a 2D region object from the overlapping area of two or more existing regions.
124 IO INSERTOBJ / Inserts a linked or embedded object.
125 J JOIN / Joins similar objects to form a single, unbroken object.
126 JOG DIMJOGGED / Creates jogged dimensions for circles and arcs.
127 L LINE / Creates straight line segments.
128 LA LAYER / Manages layers and layer properties.
129 LAS LAYERSTATE / Saves, restores, and manages named layer states.
130 LE QLEADER / Creates a leader and leader annotation.
131 LEN LENGTHEN / Changes the length of objects and the included angle of arcs.
132 LI LIST / Displays property data for selected objects.
133 LO LAYOUT / Creates and modifies drawing layout tabs.
134 LT LINETYPE / Loads, sets, and modifies linetypes.
135 LTS LTSCALE / Changes the scale factor of linetypes for all objects in a drawing.
136 LW LWEIGHT / Sets the current lineweight, lineweight display options, and lineweight units.
137 M MOVE / Moves objects a specified distance in a specified direction.
138 MA MATCHPROP / Applies the properties of a selected object to other objects.
139 ME MEASURE / Creates point objects or blocks at measured intervals along the length or perimeter of an object.
140 MEA MEASUREGEOM / Measures the distance, radius, angle, area, and volume of selected objects or sequence of points.
141 MI MIRROR / Creates a mirrored copy of selected objects.
142 MLA MLEADERALIGN / Aligns and spaces selected multileader objects.
143 MLC MLEADERCOLLECT / Organizes selected multileaders that contain blocks into rows or columns, and displays the result with a single leader.
144 MLD MLEADER / Creates a multileader object.
145 MLE MLEADEREDIT / Adds leader lines to, or removes leader lines from, a multileader object.
146 MLS MLEADERSTYLE / Creates and modifies multileader styles.
147 MO PROPERTIES / Controls properties of existing objects.
148 MS MSPACE / Switches from paper space to a model space viewport.
149 MSM MARKUP / Opens the Markup Set Manager.
150 MT MTEXT / Creates a multiline text object.
151 MV MVIEW / Creates and controls layout viewports.
152 NORTH GEOGRAPHICLOCATION / Specifies the geographic location information for a drawing file.
153 O OFFSET / Creates concentric circles, parallel lines, and parallel curves.
154 OP OPTIONS / Customizes the program settings.
155 OS OSNAP / Sets running object snap modes.
156 P PAN / Adds a parameter with grips to a dynamic block definition.
157 PA PASTESPEC / Pastes objects from the Clipboard into the current drawing and controls the format of the data.
158 PAR PARAMETERS / Controls the associative parameters used in the drawing.
159 PARAM BPARAMETER / Adds a parameter with grips to a dynamic block definition.
160 PC PCINWIZARD /Displays a wizard to import PCP and PC2 configuration file plot settings into the Model or current layout.
161 PE PEDIT / Edits polylines, objects to be joined to polylines and related objects.
162 PL PLINE / Creates a 2D polyline.
163 PO POINT / Creates a point object.
164 POFF HIDEPALETTES / Hides currently displayed palettes (including the command line).
165 POL POLYGON / Creates an equilateral closed polyline.
166 PON SHOWPALETTES / Restores the display of hidden palettes.
167 PR PROPERTIES / Displays Properties palette.
168 PRE PREVIEW / Displays the drawing as it will be plotted.
169 PRINT PLOT / Plots a drawing to a plotter, printer, or file.
170 PS PSPACE / Switches from a model space viewport to paper space.
171 PTW PUBLISHTOWEB / Creates HTML pages that include images of selected drawings.
172 PU PURGE / Removes unused items, such as block definitions and layers, from the drawing.
173 QC QUICKCALC / Opens the QuickCalc calculator.
174 QCUI QUICKCUI / Displays the Customize User Interface Editor in a collapsed state.
175 QP QUICKPROPERTIES / Displays open drawings and layouts in a drawing in preview images.
176 QSAVE QSAVE / Saves the current drawing.
177 QVD QVDRAWING / Displays open drawings and layouts in a drawing using preview images.
178 QVDC QVDRAWINGCLOSE / Closes preview images of open drawings and layouts in a drawing.
179 QVL QVLAYOUT / Displays preview images of model space and layouts in a drawing.
180 QVLC QVLAYOUTCLOSE / Closes preview images of model space and layouts in the current drawing.
181 R REDRAW / Refreshes the display in the current viewport.
182 RC REVCLOUD /Creates or modifies a revision cloud.
183 RE REGEN / Regenerates the entire drawing from the current viewport.
184 REA REGENALL / Regenerates the drawing and refreshes all viewports.
185 REC RECTANG / Creates a rectangular polyline.
186 REG REGION / Converts an object that encloses an area into a region object.
187 REN RENAME / Changes the names assigned to items such as layers and dimension styles.
188 REV REVDATE /Inserts or updates a block containing user name, current time and date, and drawing name.
189 RO ROTATE / Rotates objects around a base point.
190 S STRETCH / Stretches objects crossed by a selection window or polygon.
191 SC SCALE / Enlarges or reduces selected objects, keeping the proportions of the object the same after scaling.
192 SCR SCRIPT / Executes a sequence of commands from a script file.
193 SET SETVAR / Lists or changes the values of system variables.
194 SHA SHADEMODE / Starts the VSCURRENT command.
195 SN SNAP / Restricts cursor movement to specified intervals.
196 SO SOLID / Creates solid-filled triangles and quadrilaterals.
197 SP SPELL / Checks spelling in a drawing.
198 SPE SPLINEDIT / Edits a spline or spline-fit polyline.
199 SPL SPLINE / Creates a smooth curve that passes through or near specified points.
200 SSM SHEETSET / Opens the Sheet Set Manager.
201 ST STYLE / Creates, modifies, or specifies text styles.
202 SU SUBTRACT / Creates a new region by subtracting one overlapping region from another.
203 T MTEXT / Creates a multiline text object.
204 TA TABLET / Calibrates, configures, and turns on and off an attached digitizing tablet.
205 TB TABLE / Creates an empty table object.
206 TEDIT TEXTEDIT / Edits a dimensional constraint, dimension, or text object.
207 TH THICKNESS / Sets the default 3D thickness property when creating 2D geometric objects.
208 TI TILEMODE / Controls whether paper space can be accessed.
209 TO TOOLBAR / Displays, hides, and customizes toolbars.
210 TOL TOLERANCE / Creates geometric tolerances contained in a feature control frame.
211 TP TOOLPALETTES / Opens the Tool Palettes window.
212 TR TRIM / Trims objects to meet the edges of other objects.
213 TS TABLESTYLE / Creates, modifies, or specifies table styles.
214 UC UCSMAN / Manages defined user coordinate systems.
215 UN UNITS / Controls coordinate and angle display formats and precision.
216 UNHIDE UNISOLATEOBJECTS / Displays UNISOLATE objects previously hidden with the ISOLATEOBJECTS or HIDEOBJECTS command.
217 UNI UNION / Unions two solid or two region objects.
218 V VIEW / Saves and restores named views, camera views, layout views, and preset views.
219 VGO VIEWGO / Restores a named view.
220 VPLAY VIEWPLAY / Plays the animation associated to a named view.
221 W WBLOCK / Writes objects or a block to a new drawing file.
222 WHEEL NAVSWHEEL / Displays a wheel that contains a collection of view navigation tools.
223 X EXPLODE / Breaks a compound object into its component objects.
224 XA XATTACH / Inserts a DWG file as an external reference (xref).
225 XB XBIND / Binds one or more definitions of named objects in an xref to the current drawing.
226 XC XCLIP / Crops the display of a selected external reference or block reference to a specified boundary.
227 XL XLINE / Creates a line of infinite length.
228 XR XREF / Starts the EXTERNALREFERENCES command.
229 Z ZOOM / Increases or decreases the magnification of the view in the current viewport.
230 ZIP ETRANSMIT / Creates a Self-Extracting or Zipped Transmittal Package.

Leave a Reply

Your email address will not be published. Required fields are marked *